Bayou Barbury 3.22.21

Water is still cold and action is slow. Caught a lot of small goggle eyes that I released. At least I got a meal out of it. The pink and white fluff butt got the most action.

Current setup of my skiff. Sold the Merc and got a used Suzuki. Found a 6 foot power pole on clist. Solar chargers for both batteries. Time to go fishing!

Aquaforce Skiff

This boat was built in Florida in 1997 by Aquaforce. The company is now out of business.
16' long, 6' wide. 40hp Merc. It goes pretty skinny, but it's not really a tactical poling skiff. It rides dry at 34mph.

The Warm Fly forum is back!

The new address is http://warmfly.org

All of the original messages were lost, but all of the original forums are there.
Come on back and join in..

Jackson Kraken 13.5

This yak was designed for offshore use by Jim Sammons of San Diego. It's fast and stable and tracks great. Got a great deal from Masseys Outfitters with bckfc club discount.

Afternoon Bream Fishing

Took a trip to my favorite local pond after work. Caught 12 big 8-9" bream in an hour using fluff butts. Filleted all the bream. Yum...

Jackson Kilroy

Kayak number 8 for me. Second Jackson, first was a Coosa. They really created a great fishing machine with the Kilroy.

Fished Delacroix Saturday, logged 5 miles of paddling. Went to Hopedale Lagoon Sunday.

Here are the pluses:

• Well thought out tackle storage against the sides inside the yak as well as on the front hard deck. No more tackle boxes for me, everything is going in the yak. 
• The shock cords on the deck hold plastic bait bags and double as rod holders. Rods also store with the butts in the yak when paddling. 
• Rod holder tubes inside. Great for storing my stake out pole while traveling. I don't like the rods getting beat up on the road, they stay in the truck. 
• Paddle holders on both sides - paddle on right, stake out on left. 
• The tackle holder shock cords work well for the stake out pole, don't really need an anchor trolley, but may add one. 
• Very stable. Standing is easy on the flat deck, but then I don't really like standing in a yak much. It is nice to be able to stretch your legs. 
• Very stable in the raised seat position. Great for sight fishing. Seems to paddle even better when raised due to the sharper paddle angle. My 230cm paddle is perfect for it. Zero water drips off the paddle into the yak when in the high position. 
• Seat is very good. I would say great, but then I am coming from a Native which has the very best seat in the kayak world. The storage bags under the seat and behind the seat are standard and work well. 
• Plenty of room behind the seat for a 36 can AO bag and a crate. 
• Came with two rod holders and Ram 1.5" balls. There are tracks front and back on both sides. Might add one close to the seat as well. 
• It's fast. The lower center of gravity really makes it go. It's maybe faster than my 14.5 Slayer. It turns well and tracks well. If you get too aggressive with the seat high, it will rock a little. 
• The hatch and storage at the back has a waterproof bulkhead and has lots of dry storage. There is also storage up front with a foam divider between it. Probably plenty flotation between that foam and the rear to float it if water is taken on. 

Minus:

• Just one. It's sit inside so it takes a bit more to clean it out. No big deal, after this weekend I propped it up and washed everything down to the back bulkhead and used a car wash sponge to get the water out. 
• That sponge stays in the under seat storage. I did take a small wake over the side from a crab boat this weekend. Sponged some of it up, the rest evaporated. Water in the boat? Even lower center of gravity.. If I had paid attention and turned into that wake, it wouldn't have happened. The sides are quite a bit higher than most SOT boats. 

Overall I am very impressed. It's a well thought out boat with great fishing features.

Native Watercraft Slayer 14.5

I've had a total of seven different kayaks. Three of them have been made by Native Watercraft. I sold my Hobie Pro Angler and used the money to buy this 14.5' Native Slayer. I'm really liking it. It's fast and stable. Even without a rudder it tracks better than any kayak I've had.

Camping and fishing

I had a 22 foot RV for years. I've really been missing it. I recently got a new bumper pull camper - a Cruiser RV FunFinderX Shadow Cruiser. Who comes up with these names? Pulls easy behind my truck and is small but very nice. I love having an air conditioned place for lunch and a nap on a fishing trip. With the cheap cost of campsites and the fact that I don't have to board my dog, I can afford to go fishing more often.

One of the best days of my life, or why I sold my boat

Everyone knows the old saying "the two best days in a boat owners life are the day he bought it and the day he sold it". I bought my latest boat a couple of years ago. Great boat with a 50hp 4 cycle. It was boat number six for me. It will be last. Right, last until I buy another... 

It got great mileage on the water, around 15mpg. Rode nice, drew little water, and was easy to handle. That's the good stuff.
Why I sold it came down to a couple of factors: 12mpg towing mileage and ease of fishing. Launching and retrieving it was a little hassle, but not too bad. Only had to climb in and out 3 or 4 times each way.

What really did it for me was what it took to fish out of it:

• Get to the fishing area, drop the anchor or trolling motor
• Catch a fish
• Land the fish, usually on the floor of the boat
• Bend over, unhook the fish
• Open the ice chest, put the fish in
• Stand back up, cast
• Repeat
• Tides or current changing, pull anchor, move boat either by trolling motor or motor
• Set anchor
• Fish some more

Not a really big deal, but hey I'm old!

Kayak fishing:

• Hook up trailer to my VW diesel, 40mpg towing
• Launch kayak, usually off side of the road - Slayer has a wheel on the back
• Paddle 10 - 150 feet
• Maybe stab the stake out pole, maybe not
• Cast, catch fish
• Land in between legs
• Turn around, put fish in bag
• Repeat
• Pull stake out pole, move 10-150 feet
• Fish some more

I would come home from a boat trip completely exhausted. Kayak trips are much more relaxing for me.

Hopedale Trout

Since nobody wanted to buy my boat, I tuned it up and took it to Hopedale. I ran around a bit. Went into the marsh behind Lena Lagoon and caught a few trout, then went to the dam and lost my anchor. At about 1pm I headed down the Spoil Canal, where I saw several yaks fishing at the first cut. I went on down to the third cut to the right and anchored in the Spoil Canal right at the cut. That's Blind Pisana Bayou, 2.7 miles down.From 2 till dark it was trout on every cast. I threw back at least 50 11" trout. The only thing they were hitting was a Saltwater Assassin Pinfish under a popping cork, which is similar to the SA Opening Night. That color works great when white shrimp are running. Fished till almost dark and left them biting.

FNT VII recap

I've been a member of the Bayou Coast Kayak Fishing Club for a long time, but I have rarely gone to the tournaments. This was my third entry. I've always kind of had the fly fishers' attitude about competitive fishing - I never wanted to make what I do for relaxation a competition. The competition in BCKFC is for the most part friendly, and it's a great bunch of folks to hang with. I will start doing
more of them.

I came down Friday afternoon and went over to Joshua's where Nick Lauve (Teknickcull) had just landed his kayak. He had a slam of redfish, flounder, and specks. He said he was in the islands straight out from Joshua's and the water was so clear you could see the bottom. He asked if I was heading out and I said no, I had seen all I needed to see. Thanks Nick!

Saturday morning I started with breakfast at Delta Marina's restaurant since I knew I hadn't brought my light pole and could not launch until daylight. I launched about a half hour past sunup at Joshua's and headed out to the islands where Nick and Paul Bernard were fishing. Paul had already caught his Leopard Red winning red before first light and they both were steady catching trout on topwaters. I put the Rockport Rattler jig head from the captain's bag on with a newpenny/chart. double tail gulp also from the bag and started bouncing it off the bottom next to the grass. Soon I got a hookup. When it got to the boat at first I thought I had a monster flounder, but it was a big sting ray! While I was getting it off the hook, I broke my Okuma ML rod into three pieces. Glad it's lifetime warranted..
The next fish was a nice 17+ inch flounder. Then I caught a keeper speck and then a 12-1/2" flounder which I released to grow some more or hopefully help some else to make a slam.

The action slowed down so I headed south to an outlying island at the edge of the marsh. I saw a lot of activity in the water and tossed the gulp close to the shore. It was a 27-1/2" redfish, 3/4" too big. After releasing her I then moved around to the front of the island into the open water, staked out and started casting towards the island. I caught four specks around two pounds each one after the other. I didn't weigh or measure them, just tossed them in the cooler and kept fishing. I also picked up a couple of high slot size reds there.

Once the tide stopped moving I worked the islands west of the point and picked up another nice red. It was getting past noon so I started heading in to the marsh south of the landing. I stopped and worked a glow gulp shrimp with a Shiney Hiney jighead (freebee from the BCKFC forum) under a popping cork. As I was pulling away working outlying grass clumps, I got the biggest slot red of the day. I headed on in and got to the weigh in for 3pm.

I thought I had a chance, but there were a lot of people weighing in a lot of fish. The redfish were especially impressive, all were big and healthy. After talking to Ben (fishtaco) I knew he had a good chance of winning it with 12 lbs+. It was a lot of fun listening to the awards knowing that I hadn't been called yet. I got 4th place cajun slam. I lot of the elite members get teased about being 4th, but I'll take it any day! It was my first win of any kind in a tournament.

Congratulations to all the winners and a big thanks to Steve, Dave, Clayton, and all the club volunteers. It would have been a really nice weekend even if I hadn't caught a fish.

New kayak - on a trailer

Look a bit further down to my post about G.A.S. I might have cured it this time. Yeah right.
This is kayak number 6 for me, a 2012 Hobie Pro Angler 14. I had a trailer already and with the trailer the size and weight of the kayak doesn't really matter. This is the heaviest kayak I've had, but with the trailer it's the easiest to load and unload. Just about everything I need fits in the front and center hatches. I just grab the ice chest and rods and I'm ready to go fishing. What I like most about the mirage drive is that you can fish while you are moving, no swapping paddles for rods. I've drunk the Kool-Aid and I'm glad I did!

I pull it with my '03 VW Jetta TDI diesel. 37mpg with the trailer, 45 without it. More info: http://myvwtdi.blogspot.com/

Big redfish

We were fishing at the north end of Northwest Island (it's underwater now) in Lake Raccourci and were catching trout on every cast, then they just shut down. Then I caught this redfish. It hit a glup shrimp under a popping cork. It was quite a fight on 12 lb. test line. It was about 4" longer than the 48" ruler on the side of my boat. We released her unharmed.

Oil or the Environment?

My friend Joe Kahler posted this on the laflyfish.com forum:

Why is it that to some folks these days, if you're against letting Big Oil do whatever it damn-well pleases in our home waters, you're suddenly branded an air-head tree-hugger or, worse, a Democrat? 

Folks, it's NOT a choice between environmental sensitivity and jobs/prosperity for the people.  That's a line of BS this State bought years ago from Big Oil.  When we hear Jindal and the Petros make that argument in its various forms, we should be hearing them say, "It's a choice between environmental responsibility and maximizing gas and oil profits."  I think they're in denial about the fact that no matter how big your profits, they won't be big enough to insulate you from the consequences of ecological destruction if we don't WISE UP.

Bass Cat Popper

The latest Fly Fisherman magazine has a fly pattern called The Cat. It's tied using spun deer hair for the head. I don't mind spinning deer hair, but silicone floatant is not readily available here and I really don't like using it. I used a piece of closed cell foam for the head on my version. The zonker tail really gives it great action. I put one together and went to my local pond to make sure it would float right. It did and got a lot of action, and even bream had a go at it.

Recipe:
#2 Mustaad 34007 hook
Foam popper head crudely fashioned into a head (the bass don't care)
Doll eyes superglued on, then head is coated with Loon Hardhead
3 inch or so zonker tail
Marabou collar
Extra long hackle



Here is a variation using a Rainy's Foam Frog Body:

Deceiver

This is a simple version of the Deceiver fly. It's a great baitfish imitator, great for all species of saltwater fish. I've also caught bass and crappie on it.
#2 - 2/0 stainless hook such as a Mustaad 34007
4-10 hackle feathers
Gold or silver flash
Gold or silver mylar for body
Red bucktail collar
Peacock hurl topping
Black thread
Tie in the hackle, then the flash. Tie in the mylar at the back, extend thread to front of hook, then wrap the mylar body. Tie in the collar, then the topping. Tie cone head, then coat with a couple of layers of Hard As Nails or epoxy.

Inline spinners for fly casting

This is my variation of the Tom Nixon spinner fly: http://laflyfish.com/flies/tom-nixon-spinner.php
I use a long shank #2 - #6 hook. I use about a foot of wire to make it easy to work with. Thread the wire through the hook eye, then wrap the hook 4 or 5 times. Bend a right angle in the wire close to the hook, then hold the wire and twist several times until the wire breaks cleanly at the hook. Straighten the wire so that it is aligned with the hook shank and then put the beads, and the clevis and blade. Then form the eye, it's easiest to do with a small pair of round jawed slip ring pliers. Mine came in a tool kit for bead chain making that Michael's sells for about $7. It comes in a box that is perfect for storing parts. Once you have the eye formed, wrap and break the wire as done on the hook.
A great source for the parts is: http://lurepartsonline.com
I use marabou for the tail and chenille or estaz for the body on freshwater spinners with a #6 hook. On the saltwater version, I use buck tail for the tail and mylar for the body, then coat the body with Hard As Nails clear nail polish.
BTW I learned all this at the monthly fly tying session with the Red Stick Fly Fishers club. Don Richardson demoed it, and even brought a bunch of the Michael's kits and passed them on at cost.

Pfluegar reels

I like my old Pfluegar reels. I'm not really collecting them, I use most of them a lot.
Left to right: CJ 1495, US 1495 1/2 with four spare spools, US 1495 DA, Sal-Trout 1554, two Progress 1774's, Progress 60.

Here's some close ups of the Progress 60.

Little Mo part deux

Second time for me that is.. The Red Stick Fly Fishers made the annual pilgrimage to Murfreesboro, Arkansas for the "Rainbeaux Coalition" trip. We stayed at White Oak Creek Retreat again this year. Friday was below freezing all day, but it warmed up into the 50's for Saturday and Sunday. Many more pictures here: Little Mo 2009.